Brand New With Box And Battery Included
This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
Metal Scan Detection
Metal Scan Detection
First scan 1 in scan mode (or Stud ½ in. Stud 1 ½ in.), find the location, pick up the stud finder, in the air, press the mode switch button to switch to metal mode, then repeat the previous to determine the location of metal objects faster.
Stud Scan Detection
Stud Scan Detection
Stud 1 ½ in. scan: Locates the center and edges of wood and metal studs up to 1 ½ in. (38 mm ) deep.Stud finder can be calibrated anywhere on the wall.
Live AC Wire Detection
Live AC Wire Detection
AC Wire Warning detection feature works continuously in anything Scan modes. When live AV voltage is detected, the AC warning indicator illuminate and protect your safety.
use
Step 1: Calibrate the tool before every scan
Stud finder can be calibrated anywhere on the wall.
Place Stud finder against the wall, press the power button, Press the mode switch button to the mode selected. Press the Scan button to start calibration, the signal bar disappear and hear the beep and the calibration is completed.
Start scanning again 2-3 s after successful calibration.
use
Step 2: Scan the wall
Slowly slide tool across surface. Arrow and EDGE indication will illuminate, indicating location of the stud edge.
use
Step 3: Find the location of the stud
When the center of the stud is found, the full bar, arrow, and center indication are shown on the lcd display, and the buzzer sounds.
Our Buyer Protection Pro is added for a fee to every purchase from a Pro seller made with the “Buy now” button. We secure your money and only release it to the Pro seller 14 days after delivery.
Information on data processing by this Pro User is available in their and information on the joint data processing of Vinted and each Pro User is provided in section 4 of the Privacy Policy.
5 in 1 Stud Finder Electronic Sensor Beam Wall Detector Edge NEW
Brand New With Box And Battery Included
This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
Metal Scan Detection
Metal Scan Detection
First scan 1 in scan mode (or Stud ½ in. Stud 1 ½ in.), find the location, pick up the stud finder, in the air, press the mode switch button to switch to metal mode, then repeat the previous to determine the location of metal objects faster.
Stud Scan Detection
Stud Scan Detection
Stud 1 ½ in. scan: Locates the center and edges of wood and metal studs up to 1 ½ in. (38 mm ) deep.Stud finder can be calibrated anywhere on the wall.
Live AC Wire Detection
Live AC Wire Detection
AC Wire Warning detection feature works continuously in anything Scan modes. When live AV voltage is detected, the AC warning indicator illuminate and protect your safety.
use
Step 1: Calibrate the tool before every scan
Stud finder can be calibrated anywhere on the wall.
Place Stud finder against the wall, press the power button, Press the mode switch button to the mode selected. Press the Scan button to start calibration, the signal bar disappear and hear the beep and the calibration is completed.
Start scanning again 2-3 s after successful calibration.
use
Step 2: Scan the wall
Slowly slide tool across surface. Arrow and EDGE indication will illuminate, indicating location of the stud edge.
use
Step 3: Find the location of the stud
When the center of the stud is found, the full bar, arrow, and center indication are shown on the lcd display, and the buzzer sounds.
Our Buyer Protection Pro is added for a fee to every purchase from a Pro seller made with the “Buy now” button. We secure your money and only release it to the Pro seller 14 days after delivery.
Information on data processing by this Pro User is available in their and information on the joint data processing of Vinted and each Pro User is provided in section 4 of the Privacy Policy.